Motorcycle Exhausts and Exhaust Systems for Honda CB1000R
The exhaust system of the Honda CB1000R is clearly visible. The often chrome-plated pipes vibrate while in motion and produce a substantial amount of noise, which is desired by many motorcyclists. Motorcycle exhausts and exhaust systems for Honda CB1000R add to the sense of style and aesthetics of the motorcycle.
What components make up the exhaust system of the CB1000R?The exhaust system runs a mechanism that guides the dissipated fumes away from a bike's engine. Those that make up the system include:
- Cylinder head: Referred to as the "head," it is placed above the cylinder block. This part closes off cylinders and turns them into the combustion chamber. It also allows for fuel and air to enter the cylinders, and the combination of cylinder and head is referred to as the barrel.
- Exhaust manifold: Used to collect the expended gasses from the various barrels into one cylinder. Most bikes having this feature implement the exhaust system power valve.
- Turbocharger: An after-sales addition used to boost engine power through forced induction that permits the engine to draw in more air for fuel combustion purposes.
- Catalytic converter: Adds to the efficiency of the systems by using catalyzed chemical reactions that convert the harmful dissipated fumes into less toxic materials. The type of converter used is dependent on the catalyst used.
- Muffler: An additive used to reduce the amount of noise released by the engine by concentrating it at the rear of the motorcycle and blowing backward.
There are various reasons why people choose to change the exhaust system, either in part or in its entirety, to alter its looks or system performance. The factors to consider are:
- Preparation: Before altering the original system, it is important to check the service manual for the steps required to remove the existing system. You should ensure that the service area is clutter-free, and should check first with the replacement system to confirm that all mounting hardware and gaskets are available. This consideration also includes a thorough check of the parts list.
- Removal: Removing the different components of the system is procedural. Before unfastening any of the parts, ensure that the bike is properly secured on a level surface.
- Installation: This is also procedural, and you should ensure that all adjacent parts will fit.
A motorcycle's exhaust system should follow the standard order of installation where:
- Header pipes are bolted to the manifold.
- Mid-pipes should follow the header pipes.
- The muffler concludes.
System installation begins from the manifold proceeding outward toward the muffler. During installation, the exhaust systems manifold should be cleaned thoroughly to remove any carbon buildup in order to prevent power loss.