Pedaleiras Pé de motocicleta e Almofadas de Pedal para Honda CM400T

Motorcycle Pedals and Pegs for Honda CM400T

The Honda CM400T is a large motorbike with a seat designed for two riders and foot pegs to support their feet during the ride. These classic bikes were produced from 1979 to 1982, and replacing worn-out pegs and pads helps to maintain their cosmetic condition. The replacement process takes 30 to 40 minutes and requires a locking motorcycle stand, a hex key, and a socket wrench.

The pegs are held in place by several bolts and can be replaced without removing any other parts. Before performing this procedure, turn off your bike and stabilize it with a locking stand.

• Use a socket wrench to loosen the bolts securing a foot peg to the Honda’s chassis.
• Remove the old peg and then position the new one in its place on the chassis.
• Tighten the bolts on the foot peg to secure it in place.
• Repeat these steps for the other pegs.

The pads are connected to a pedal assembly that can be removed from the Honda CM400T by loosening several bolts. The pads can be replaced separately or along with the assembly.

• Use a socket wrench to loosen the bolts securing a pedal to the chassis and then remove the assembly.
• Use a hex key, or Allen wrench, to loosen the bolts securing the pedal pad to the assembly.
• Replace the old rubber pad with a new one and tighten the bolts on the assembly to secure it in place.
• Position the assembly on the chassis and then tighten the bolts to secure it in place.
• Repeat these steps for the other pedals.

The Honda CM400T is designed for two riders who each have a set of foot pegs for support and stability while making turns, braking, and accelerating. The passenger’s pegs are positioned behind and above the driver’s pegs so that the passenger’s legs are bent more sharply than the driver’s when both riders’ feet are resting on the pegs. The passenger’s pegs are optional and need to be installed only when two riders will be using the motorcycle.

These products are designed to replicate the original foot pegs and pedal pads exactly. Replacing worn-out pegs and pads with original parts will help to restore your CM400T to its factory condition and keep it running smoothly and efficiently for its full lifespan.

Foot pegs play an important role in protecting riders’ feet from the road and providing support when taking off from a starting position. Pedal pads help riders shift gears and apply the brakes without losing purchase on the pedal arm.